ML 750 nMemoery Expansion Board

[tultalk1]

Difficult to find information.

Is memory board 16 slot 122215-001.

Spec for ML-750 says max 16gb. 64 bit should address more than that??

Thanks

Robert

[Suman_1978]

Hi,

If you are referring to the old Compaq ML750 Server, then its 1GB module max.
Supports 100-MHz registered SDRAM 128-MB, 256-MB, 512-MB, and 1-GB DIMMs

https://support.hpe.com/hpesc/public/docDisplay?docId=c01131163
https://support.hpe.com/hpesc/public/docDisplay?docId=c04282311

Thank You!
I work with HPE but opinions expressed here are mine.

[Sunitha_Mod]

Hello @tultalk1,

Thank you for writing to us. 

We noticed that you've confirmed in a private message that the issue has been resolved. Could you kindly share the steps or solutions you found? This could greatly benefit other members of the Community. 

[tultalk1]

Thanks for response. Yhat is what I supected.  In the picture of the server under Quick Specs, Item 7 looks like there are two of them? Also just below item 7 is an unidentifiwed item. Coud you identify that please.

Lastly, my ML750 is mounted in a rack with UPS, tape drive etc etc.. I have not tried to open theside panels. Can those be opened while it is in the rack?

I am afraid of the whole rack tipping oever from the weight of the ML 750. It is on wheels.

Thanks

Robert

[Suman_1978]

Hi,

I am not sure what that part below the memory expansion part is.

Thank You!
I work with HPE but opinions expressed here are mine.