ML110 G3 and chip ATI ES1000 (Drivers For Win7)

[ManSofT]

Hello:

I have one HP Proliant ML110 G3 with chip ATI ES1000 and windows 7 x64 but not find the driver.

I try to install wxp, w2003 and w2008 x32 and x64 dricvers but not found (O.S. not supported) 

Someone can help me find the right driver?

Thanks 

[Johan Guldmyr]

Hi,

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3279679&prodTypeId=15351&prodSeriesId=501887&swLang=8&taskId=135&swEnvOID=1005#11360

Looks like a graphics driver is available for w2003

[ManSofT]

Hi Johan:
This driver I've used and the message in installation is:
"The installation program can find no component installed with the current configuration of hardware or software. Make sure you have the hardware or software needed."
The hardware exist in server because I see this chip.
If I install the driver from Device Manager the message is:
"The driver selected for this device is not compatible with this version of windows."
I've already tried with the drivers: wxp, w2003 and w2008 in x32 and x64 versions.
Any other ideas?
Thanks

[Johan Guldmyr]

Right, so you're trying to install a win2k3 32-bit driver in Windows 7 x64.

Not so strange that it won't work then :)

I believe the only place that may have this driver is manufacturer of the chip.

[ManSofT]

Hi Johan,
Ok, but in AMD forum said that to contact with HP and here said that to contact with AMD.
Link to forum AMD: http://forums.amd.com/game/messageview.cfm?catid=279&threadid=154869&enterthread=y
I do not know what to do.
Any other idea?
Thanks

[Johan Guldmyr]

Well, as HP don't have any public drivers available for this chipset.
Do you think that HP has made any 'behind the scene' for this server?

Maybe you'll have better luck if you try to use Linux?

I searched a little, have you tried the Vista x64 bit driver?

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=wk-74757-1&jumpid=reg_R1002_USEN

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=471497&swItem=MTX-2c794b8e4d5444b49b391f8f23&mode=3

Apparently some blade workstation also has this chipset.

[ManSofT]

Hi Johan,
Thanks, this driver is installed, but not found correctly.
When reset pc intent to do something but the resolution is still very low.
In Device Managers appears an exclamation and one message:
"This device can not find enough free resources to use. (Code 12)
If you want to use this device, you must disable one of the other devices on this system."
And the resources tab is disabled.
I have one ML110 G3 with P4 3Ghz, RAM is 2Gb and HD is 750Gb.
Thanks

[Johan Guldmyr]

Great.

[ManSofT]

Any ideas to fix the error that appears now?

Thanks

[Johan Guldmyr]

Nope, tried this? http://lmgtfy.com/?q=%22This+device+can+not+find+enough+free+resources+to+use.+(Code+12)

[ManSofT · Accepted solution]

Ok, thanks very much, found correctly!

Summary of solution:
1.- Install driver of HP (ATI ES1000 Video Controller Driver for Microsoft Windows Vista 64-Bit Editions):
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=wk-74757-1&jumpid=reg_R1002_USEN

2.- Restart Server

3.- (Optional) If in Device Manager appear an exclamation with message:
"This device can not find enough free resources to use. (Code 12)"
Execute in cmd (mode administrator):
bcdedit /set CONFIGACCESSPOLICY DISALLOWMMCONFIG
Then restart your server.

I hope you serve this solution, like me.

[Johan Guldmyr]

Good work, thanks for posting the solution!