ML110 GEN 11 repeat always ilo firmware update with same versions

[COENTO]

Helo, i just try to update all bios/firmware componentes, one on one, but with last, ILO, the server stuck on boot loop updating ilo firmware, always say "succesfully been flashed", reboot, again fast reboot, and then autoenter f10 intelligent provisioning (i dont press f10) , but not enter, just go again flashing update process, downloading files and say succesfully... and start again
 try power off, unplug, push on button to drain energy, an then cant enter windows server normally, but if i press f10, start again process...

So can enter windows, but no enter provisioning, ilo (even i have entered, not configured, not used yet), and cant check more updates...
My first update was bios, about fan noise, awfull....

All these process are really bad, so slow enter "intelligent" provisioning, really we are getting 80´decade, so slow enter for manage raid, so slow enter in update app, oh my god its sooooooooo slow for all except classic bios...
I cant believe in a new out of the box hpe server can dance with two stupids bugs and slower manager or update proccess i never suffered.

[support_s]

System recommended content:

1. HPE iLO 5 3.06 User Guide | Configuring core boosting by using iLO 5 and Always On Intelligent Provisioning

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[COENTO]

"Click Performance in the navigation tree"

 ¿where? i only see f9,f10,f11 or f11

[Greeshma21]

Hi @COENTO 

You can see the "Click Performance in the navigation tree" option in the iLO Web Interface as shown in the below image.

Regards,
Greeshma

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.