ML110 wil not start

[JC_NAWSCB]

ML110 G6 did not restart after installing September 2015 MS security patches.  The Standby Power LED (5) on the motherboard is on, the standby light on the front next to the power button is on (amber), and if a network cable is plugged in, the lights on the network jack light up.  No fans spin up, no display, no beeps.

Anybody have an idea where to go from here?

Thanks.

[Suman_1978 · Accepted solution]

Hi,

I guess its nothing to do with MS patches.

Issue could be with system board or power supply unit.

Swap power supply units if you have any compatible PSU.

Clear NVRAM from System Maintenance Switch on the system board.

Try with minimum RAM and remove any PCI cards that are not necessary for booting.

Thank You!
I am a HPE employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers

[JC_NAWSCB]

We did not have a replacement power supply, but since there were some lights on, we thought it was probably the motherboard, so we replaced the motherboard, and that fixed it.