ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G10 Can't enable 4 ethernet ports

 
SOLVED
Go to solution
Highlighted
Occasional Visitor

ML350 G10 Can't enable 4 ethernet ports

how do i enable the 4 ethernet ports for this server it seems that when i installed a proxmox on it ,it says all of it's port our down also why is that when i enabled the ilo shared it also disabled the ilo dedicated ports

sorry im still a newbie i really need alot of help 

4 REPLIES 4
Highlighted
Honored Contributor
Solution

Re: ML350 G10 Can't enable 4 ethernet ports

Hi,

all the NIC's are enabled by default.

If you can't use them in proxmox I assume proxmox has not the right driver included for the NICs.

The iLO can use the dedicated iLO Physical Port (default) or switch to shared.

In shared mode, the iLO runs on top of NIC Port#1 and you can save 1 Cable.

My Customers always prefer a dedicated Port, but it is either ... or, not both

Cali.


======================
That was not planned in this way.
Highlighted
Occasional Visitor

Re: ML350 G10 Can't enable 4 ethernet ports

What open source for virtualization can i use besides proxmox?
Highlighted
Honored Contributor

Re: ML350 G10 Can't enable 4 ethernet ports

You can check the Supported OS here:

https://techlibrary.hpe.com/us/en/enterprise/servers/supportmatrix/vmware.aspx

Or go to Support enter the Server Model and check for OS Drivers. 


======================
That was not planned in this way.
Highlighted
Occasional Visitor

Re: ML350 G10 Can't enable 4 ethernet ports

will do,Thanks for all your help