Query: ML350 Gen10 fan speed issue

[LynchDavid]

I'm using an RTX quadro 6000 on an ML350 gen10. I have been suffering from noise for a year now, when I boot up the server and run GPU BURN for about 5 minutes, the speed of the front fans (FAN 1,2,3,4) goes over 90%.

I have followed many solutions on google to solve this problem but I couldn't solve it. Many solutions said to try with OPTIMAL COOLING so I selected that option till now but there was no improvement. So yesterday I selected Enhanced CPU cooling option and the speed of the front fans is around 30% and it is very comfortable. But today, as the weather is 30 degrees Celsius, the fan speed has reached 90% again. Is there any way to solve this problem?

I think the hint is that only the front fans (1,2,3,4) are running at 90% and the rear fans (5,6) are running at 15%. Thank you.

[TVVJ]

Hello,

If there are any third party devices, please uninstall them and observe if the fans behave the same way to isolate the issue.

Regards,

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".