ml350 gen11 storage/boot device cabling

[fxs]

HI,
I bought a ml350 gen11 4lff 4410y in an online store in Switzerland.
On the storage controller cabling (https://support.hpe.com/hpesc/public/docDisplay?docId=sd00002366en_us&page=GUID-C8A54573-2980-4788-BF62-8B86FE562413.html), the cable is blue (PCH port LP SlimSAS port 1).
I have an HPE NS204i-u Boot Device. The wiring diagram can be found on the page https://support.hpe.com/hpesc/public/docDisplay?docId=sd00002366en_us&page=GUID-DF064A8D-AEFE-4286-A8F6-B9D28BCA9630.html
First question :
Can I plug the NS204i-u Boot Device into the PCH LP SlimSAS port 2 port (port 1 is busy).
Second question:
If I want to put a box 2 (storage), how does that work for the wiring?
Regards

[shuff · Accepted solution]

Yes, you can plug the NS204i-u Boot Device into the PCH LP SlimSAS port 2 port even if port 1 is busy. For the second question, the server supports various cable kits for different configurations, such as the HPE ProLiant ML350 Gen11 LFF SAS/SATA PCIe Controller Cable Kit (P47227-B21) and the HPE ProLiant ML350 Gen11 SFF Tri-Mode PCIe Controller Cable Kit (P47233-B21), which support up to 3x 4LFF drive cages and up to 3x 8SFF drive cages respectively with HPE stand-up PCIe storage controller.

[Sunitha_Mod]

Hello @fxs,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.