ML350 Gen9 - The F10 Intelligent Provisioning menu is not showing

[OGUZTECH1]

ML350 Gen9 - The F10 Intelligent Provisioning menu is not showing up, and I couldn't use any of the downloaded SPP or other resources. I can access the RBSU menu and have tried many settings, but the issue hasn't been resolved. I can access the iLO4 interface, but I couldn't do anything from there either. I am looking for a solution and would appreciate any help.

[BPSingh]

Greetings!

Please check if Intelligent Provisioning F10 prompt is enabled. 

https://support.hpe.com/hpesc/public/docDisplay?docId=c04398276&docLocale=en_US&page=s_disabling_intelligent_prov.html

If the issue persists, try re-installing Intelligent Provisioning for Gen9 Servers and check the outcome. 

https://support.hpe.com/connect/s/softwaredetails?language=en_US&collectionId=MTX-09aa7253e9134bbb&tab=releaseNotes

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".