ml370 g4 using ddr2 5300

[maxing]

Is there a reason the ml370g4 doesn't support higher ddr2? I've done this tons of times with other servers and workstations, but the ml370g4 just gives me a long beep (5 seconds I think) at boot when I try to use 5300 (3200 is in short supply here, but I have some 5300 from a VMware server upgrade that I want to try to use).

Thanks
Max.

[dlaredo]

I have the same issue, the solution is to have a lower ddr2?

[.•´¯`•.¸¸. ><((((º>]

Hello,

I dont know the reason wy, but the only supported DIMMs for this server are:
30
512 MB GB, PC2 PC3200R DDR2 SDRAM DIMM, Option kit: (2 x 512 MB) 343055-B21
359241-001
413384-001
Yes

1 GB of Advanced PC2 PC3200R DDR2 SDRAM DIMM Memory, Option kit: (2 x 1024 MB) 343056-B21
359242-001
413385-001
Yes

2 GB of Single-Ranked, PC2 PC3200R DDR2 SDRAM DIMM Memory, Option kit: (2 x 2048 MB) 343057-B21
359243-001
413386-001
Yes

Joakim HP Support