Monitoring ML150 sensors with IPMI ?

[Andrew Loftus]

We have purchased and installed a few ML150 G3 servers with the optional iLO card [Windows Srv2003 SP2] - but cannot find a nice user friendly bit of software to run that shows the status of the sensors - and that would alert via email if a sensor when out of range. I am surprised that HP don't have something available. Can anyone out there help/comment on how to achieve this basic sensor monitoring/alerting Windows Srv 2003 please?

[James ~ Happy Dude]

Hello Andrew,

You may try HP Lights Out Management or HP SIM.

Regards,
James.

[HP_Sammy]

Hello Andrew,

Please login to iLO through a web browser using its ip address and Default Admin user name and password is "admin" and then u can click on monitor sensors from main home page.

Or U can also check sensors from Bios

Press F10 to get into bios go to advanced>IPMI>Realtime Sensor data

And for more info please download Lights Out 100 Remote management User Guide from below link

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179911&taskId=101&prodTypeId=15351&prodSeriesId=1163831#4


Cheers :)