Moving an array from a DL360G9 to another DL360 G9

[ddicky]

I plan to save some setup time on my O.S , applications and database. I have an array of RAID 1 which I plan to unplug it from DL360G9and let call  it A server.  I plan to re-plug in these 2  HDD RAID 1 into  another  DL360G9 call it  B server on the same RAID 1 configuration and HDD slot on the B server. Will it work fine for the B server?

[Jimmy Vance]

---

@ddicky wrote:

I plan to save some setup time on my O.S , applications and database. I have an array of RAID 1 which I plan to unplug it from DL360G9and let call  it A server.  I plan to re-plug in these 2  HDD RAID 1 into  another  DL360G9 call it  B server on the same RAID 1 configuration and HDD slot on the B server. Will it work fine for the B server?

---

Yes, as long as the firmware on the Smrt Array controller is the same or newer than the firmware version on the original server.  

Standard discalimer: Anytime you are changing hard drive configuations, make sure you have a valid backup of the data