HPE Community
ProLiant Servers (ML,DL,SL)
1836849 Members
2320 Online
110110 Solutions
New Discussion

Moving arrays between servers

 
Kerry Quillen
Valued Contributor

‎05-10-2022 05:36 PM - last edited on ‎05-11-2022 09:49 AM by

‎05-10-2022 05:36 PM - last edited on ‎05-11-2022 09:49 AM by

Moving arrays between servers

Is it possible to move drive arrays from 1 server to another?  I've done this in the past with no issues but its been years.  Not sure if things have changed.  I have a DL380 Gen9 with 3 raid5 logical drives.  The integrated network card has failed (all 4 ports).  The server is no longer under mainteance so getting the MB replaced is not an option.  I have another identical DL380 Gen9 with the same array controller in our testlab.  In the past, I would shut both servers down, move the drives from the bad server to a godo server, power up the good server and all was well.  Is this still a doable process?  

0 Kudos
Reply
1 REPLY 1
Richard75
Frequent Advisor

‎05-11-2022 01:26 AM

‎05-11-2022 01:26 AM

Re: Moving arrays between servers

Hi,

Yes you can still do this

I work for many years with HPE products, but i don't work for HPE so this is not official support
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.