SOLVED
This is a DL380 gen 10. I need to expand the logical drive /array. The server was originaly built with 2 Arrays. Array 1 - 3 600GB SAS drives (RAID 1 with spare) for the OS (Disks are in bays 6-8) Array 2 - 13 2TB SATA drives for Data in a RAID 5 with a spare. These disks are in bays 1-5 and 9-16. (the drives in 9-16 were added for additional capacity after the server was in use.) I need to expand Array 2 again and have added 2TB SATA drives in slots 17-24. Smart Storage administrator sees the new disks but there is no option to expand the existing array. What needs to be done to utilise all 21 disks in Array 2?
Thanks
Hello,
Thank you for letting us know that the issue was resolved.
Regards,
I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[All opinions expressed here are mine, and not official statements on behalf of Hewlett Packard Enterprise]
@Chris_Coates wrote:
This has been resolved
Thanks
Hello @Chris_Coates,
That's Awesome!
We are extremely glad to know the problem has been resolved. It would be great if you could share the solution you found so that it will help the other users in the Community.
Thanks,
Sunitha G
I'm an HPE employee.
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
