No way to monitor RAID on an ML310

[Tim Goldfield]

I've just installed windows 2003 and SBS 2003 on two new ML310 servers. When I installed them I used the SATA 6-Port RAID driver during installation. I have finished the install but I have no way to check the status of the RAID array. If I use Programs->HP System Tool->HP Array Configuration Utility I get the message "ACU did not detect any supported controllers in your system"

If I try any of the other tools I don't get any reports and I can't log in using HP System Manager because it keeps saying invalid login.

Any help would be greatly appreciated!

[KarloChacon · Accepted solution]

so this is not a Smart array controller because of that you can't use ACU

see this
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/sataraid/questionsanswers.html?jumpid=reg_R1002_USEN


you need


HP SATA RAID Controller Manager for Windows 2000/Windows Server 2003
http://h18007.www1.hp.com/support/files/storage/us/download/23531.html

regards

[Tim Goldfield]

Thanks for the response and for answering my question! I have installed the other RAID management software and it works fine now!

Strange that the software it installed automatically was not the correct version! Still, it's all sorted now!