PL3000 with 512MB memory

[Ahmad Yusri]

Dear all ,

I Just bought i unit 512mb memory and install into my PL3000 350mhz .When i boot the server a error message ' not supported 512mb memory'any idea .

Thanks in advance.

[Sunil Jerath]

Hello Ahmed,
Please make sure that you are using the right type of memory. Because certain PL3000 take EDO and then the others take SD RAM only.

Regards,

[Ahmad Yusri]

FYI
I bought kingston memory (KTC3617\512)and it's equivelant to my PL3000.

[Sunil Jerath]

Hello ahmed,
Defiitely it's not going to work. You need COMPAQ proprietory memory. We receive so many issues regarding this and surely 3rd party memory is hit n miss unfortunately. It does not matter if it's equivalent to the specifications of the proprietory memory or not. I know it's bitter but this is the truth.

Regards,

[Roger Faucher]

I suspect it takes Kingston KTC3614 parts. But I need more info.

Roger

[Ahmad Yusri]

i using PL 3000 P11 350Mhz with 256MB ECC Sdram.

[Roger Faucher]

There should be a number that looks like this on your case somewhere: 123456-789.
Could you post that please. There may be alphabetic characters in place of some of the numeric characters.

Thanks

Roger

[Roger Faucher]

Does your system have 12 memory slots? If so, perhaps this is your situation:
http://www.ec.kingston.com/ecom/configurator/modelsinfo_disc.asp?SysID=+6246+&distributor=0&submit1=Search
in which case the correct Kingston part is a KTC9023/512 KIT, which they no longer manufacture.

Roger

[이준호_1]

hi

i'm korea system engineer.

sorry i can't English.

you to doing action:

Check your systemboard ROM vision.

update rompaq.

I think so your problm is cause low rompaq.

I hope so get to the bottom of your problm.

bye have good luck!!!