ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Port ilo dosen't link, not access;

 
Highlighted
Occasional Contributor

Port ilo dosen't link, not access;

Please, I'm conected on the port ilo4 HP Proliant DL380 Gen7 and HP Proliant DL380p Gen8  to the configuration but the port doesen't link. cable is Ok. What can I do? Help

2 REPLIES 2
Highlighted
Acclaimed Contributor

Re: Port ilo dosen't link, not access;

How about the speed setting?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Honored Contributor

Re: Port ilo dosen't link, not access;

Are the servers configured to use the shared iLO port (LOM 1) instead of the dedicated iLO port?

No support by private messages. Please ask the forum!