HPE Community
ProLiant Servers (ML,DL,SL)
1833707 Members
2202 Online
110063 Solutions
New Discussion

POST Error : 162 System Options not set in Proliant 3000

 
Parvez Khan_1
New Member

‎09-08-2004 11:38 PM

‎09-08-2004 11:38 PM

POST Error : 162 System Options not set in Proliant 3000

ERROR :
Compaq Integrated Management Log
POST Error: 162-System Options Not

Pls Let me know the foll.
1) Cause of error
2) remedy of the error
0 Kudos
Reply
1 REPLY 1
JohnWRuffo
Honored Contributor

‎09-09-2004 12:10 AM

‎09-09-2004 12:10 AM

Re: POST Error : 162 System Options not set in Proliant 3000

Khan:

You need to run your SmartStart CD System Configuration Utility or from the system partition (F10).
If this problem persists, you have a dead RTC battery.
Here is the part you need:
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=160274-001

Connect the battery cable to battery header E9 on the system board.
Change SW2 position 1 to the OFF position on the system board.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.