POST Error 207: Present, Unused

[Geolock]

Hi,

Please help me with this errors:

Post error: 207-Memory initialization error on Processor 1 Socket 1, The operating system may not have access to all of the memory installed in the system.

Post error: 207-Memory initialization error on Processor 1 Socket 4, The operating system may not have access to all of the memory installed in the system.

Post error: 207-Memory initialization error on Processor 2 Socket 1, The operating system may not have access to all of the memory installed in the system.

Post error: 207-Memory initialization error on Processor 2 Socket 4, The operating system may not have access to all of the memory installed in the system.

Post error: 207-Memory initialization error on Processor 2 Socket 9, The operating system may not have access to all of the memory installed in the system.

Post error: 207-Memory initialization error on Processor 2 Socket 12, The operating system may not have access to all of the memory installed in the system.

In Memory Details, the status is Present, not used.

Server: DL360p Gen8.

Processors: 2x Intel Xeon E5-2690v2 3.0GHz/10-core/25MB/130W.

Memories: 10x DDR3_8GB_1600MHz (731765-B21)

DIMM location:

Processor 1: 1-4-9-11-12

Processor 2: 1-4-9-11-12

The server is running normally and suddenly it warns as above.

It becomes normal when i tried to reboot. But it happens again after few months.

I haven't tried to swap memories or clean because it becomes normal everytime i tried to reboot.

[Suman_1978]

Hi,

If its intermittent, it may need some reseating or cleaning.
Please refer to these links:
https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hp-proliant-dl380-gen9-207-memory-initialization-error-amp-295/m-p/7206679
https://community.hpe.com/t5/proliant-servers-ml-dl-sl/207-memory-initialization-error/td-p/4590581

Thank You!
I work with HPE but opinions expressed here are mine.