problem whit server compaq proliant 1600

[GABRIELA HERNANDEZ]

Hi

the server is pentium III at 600mhz and I changed the system board and the hard disk because this was damaged.


Now I don't have the smartstart cd's for configurated this and I used the scu download of http://www.compaq.com/support/files/server/us/locate/1950.html and the first boot the utility get me the next mesage
your computer and all detected have been configured then I press save the configuration and exit then I boot for the second time and the display No logical drives available SMRTSCSI not installed and the utility get me the next message
an error ocurred while trying to acces the fixed disk run the configuration utility to try and correct the error if this does not correct the problem, your fixed disk may have a physical error.

I checked the phisical connection are correct

[Tom Vicevich]

Download the Array Configuration Utility for diskettes. Make the diskettes and boot from them to configure your array. Wish I could tell you where to get the diskette builder for this. You may have to search around the HP site.

[Prashant (I am Back)]

Hi,

This is a good link when you are working without smartstart cd
http://www.geocities.com/rlcomp_1999/manual-smartstart.html

regards,
Prashant S.