HPE Community
ProLiant Servers (ML,DL,SL)
1825061 Members
5346 Online
109679 Solutions
New Discussion

Problem with adaptec 29160lp scsi controller

 
Gombos
New Member

‎09-12-2004 07:44 PM

‎09-12-2004 07:44 PM

Problem with adaptec 29160lp scsi controller

Hello,
I have an old proliant 1850 450 MHz with NT4 server and i installed an adaptec 29160LP SCSI controler with a IBM Ultrium 3583 Tape library. The problem is that the server doesn't comunicate properly with tape library and i suspect that is the scsi controller problem. The controller is PCI 64 bit (32 bit compatible). Can you tell me please if there is a special PCI slot where i have to install this controller or do you have any ideea why is not working? (the drivers are the latest from adaptec home page)
Thank you in advance,
Crysti
0 Kudos
Reply
1 REPLY 1
JohnWRuffo
Honored Contributor

‎09-13-2004 12:00 AM

‎09-13-2004 12:00 AM

Re: Problem with adaptec 29160lp scsi controller

Crysti:

Have you tried installing these drivers for the tape:
http://h18000.www1.hp.com/support/files/server/us/download/18619.html

Let us know if this helps?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.