Proliant 3000 with WS 2000

[Juterassee]

Hi,

I have an old server Proliant 3000 that I would run under Windows Server 2000. I have no problem for installing Windows Server 2000 and 2003 (I tried the both).

My problem begin when I try to install the drivers and utilities. I tried to install drivers and utilities with the Support Pack downloaded from the "HP Drivers & Download", but no matter what I choose I receive theses three erros (Installation Failed) follow :

-HP ProLiant Integrated Management Log viewer for Windows
-HP Protect your data Information and application Downloads for Windows
-HP Insight Diagnostics Online Edition for Windows 2000.

Also, I find that in many places in the cpqsetup.log :

The software will not be installed on this system because the required
hardware is not present in the system or the software/firmware doesn't
apply to this system.

So, what I do wrong?

[KarloChacon]

did you configure your SNMP settings before install PSP?

regards

[Juterassee]

Yes the SNMP is installed and configured. I think that I will try to remove my "remote insight board" just for fun.

[Juterassee]

It's not better without the insight board.

[Juterassee]

Just for fun I put an ATI Rage II + PCI and the device still in 16 colors. In the devices manager I've got a "The device could not start (Code 10)". I check in the system magement to be sure have no conflict and I have conflict. It's weird?