Proliant 800 P14 Server questions

[Lynn Lively]

I am building a server for the mission with a Proliant 800 P14 Server that was donated to them. I installed Windows 2000 server on an IBM 4.5GB SCSI drive fine after installed the StartSmart CD. Everything is working except for:

The second IBM 4.5 GB drive is not being seen. It does see the 12/24 GB DAT tape in the SCSI report during the post.

The USB has an exclimation point in the Device Manager.

How do I get to the BIOS settings (also installed the latest BIOS flash Compaq had online).

Thanks in advance,

Lynn

[KiranKumar_2]

Hi,
Proliant 800 P14 Server comes with Integrated Dual Wide-Ultra SCSI-3 controller.
As the server is able to detect the first drive and the tape drive, please make sure the second drive is working fine.

Check the ID assigned to the second drive during POST.
Also check the jumper setting on the second drive.