HPE Community
ProLiant Servers (ML,DL,SL)
1850747 Members
3286 Online
104055 Solutions
New Discussion

ProLiant DL360 Gen10 predictive failure after replacing drives in Raid 1

 
StefanHei
Visitor

‎02-22-2024 02:14 AM - last edited on ‎03-02-2024 05:43 AM by

‎02-22-2024 02:14 AM - last edited on ‎03-02-2024 05:43 AM by

ProLiant DL360 Gen10 predictive failure after replacing drives in Raid 1

We have 3 DL360 servers. These each run with 2 SSDs in Raid 1. We have now removed and stored 1 SSD from each of these Raids for backup purposes. We then wanted to rebuild the raids with new, identical SSDs. That worked properly. But a “predicted failure” is displayed on all 3 new SSDs. The Drive status LED flashes amber. The documentation says that these drives should be replaced quickly as an error is to be expected. But these are brand new SSDs.

0 Kudos
Reply
1 REPLY 1
Sham82
HPE Pro

‎02-28-2024 04:16 AM

‎02-28-2024 04:16 AM

Re: ProLiant DL360 Gen10 predictive failure after replacing drives in Raid 1

Hello,
Please share :
1. Error message.
2. Drive Model and Current Firmware version.
3. Controller Card and Current Firmware version.


Regards
HPE



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.