HPE Community
ProLiant Servers (ML,DL,SL)
1826531 Members
4281 Online
109695 Solutions
New Discussion

Re: Proliant DL380 Interlock Light

 
Matthew Kiessling
New Member

‎08-18-2003 04:39 AM

‎08-18-2003 04:39 AM

Proliant DL380 Interlock Light

I have a DL380 on the Motherboard the Interlock light is lit and it won't boot. I think it might be the riser board but I have reseated it a couple of times and it seems that it is in good. Any ideas or is that not what the Interlock light means??
0 Kudos
Reply
2 REPLIES 2
Janine Bertolo
Honored Contributor

‎08-18-2003 04:54 AM

‎08-18-2003 04:54 AM

Re: Proliant DL380 Interlock Light

Hello;

The interlock light means the riser is not seated...

They are famous for seeming to fit snugly and still being loose. I recommend undoing the screw, removing it fully and practically sitting on it to reseat it.

If it seated solidly and still giving you the interlock, replace the riser board.

sincerely,

Janine
To get results you've never had before, try something you've never tried before.
0 Kudos
Reply
Matthew Kiessling
New Member

‎08-18-2003 06:03 AM

‎08-18-2003 06:03 AM

Re: Proliant DL380 Interlock Light

Thanks Janine,

I guess I was just being too delicate with the darn thing. I pushed on it good and hard it sat down another mm and works fine now!

Thanks again!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.