[ProLiant DL385 Gen11] boot stuck at "Secure Start verification - complete"

[ik_valou]

Hi,

I'm searching what I should do / test before open a ticket.

My server a ProLiant DL385 Gen11 won't boot it freezes during start-up just after indicating "Secure Start verification - complete". 

The POST Code is 0007

what I've tried:

• ROM Update
• nvram reset 
• electrical disconnection for a few minutes
• removal of all ram except one per cpu

If you have any ideas or solutions to share ?

Best regards,

[support_s]

System recommended content:

1. HPE ProLiant DL385 Server - Troubleshooting

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[shiva_jr]

Hi @ik_valou ,
    Please follow the below steps-
1.  Any hardware errors or issues reported in iLO? If yes, please reply with the error.
2. Any amber or red indication at Front panel of the server?
3. Did you changed any hardware like adding/removing add-on card, RAM, Processor etc.
Regards,
Shiva_jr

[EllaDavis]

Thank you so much for the help.

[shiva_jr]

Hi @EllaDavis , 
   Are you able to resolve the issue by my suggestions ? If yes, please encourage me by giving 'Kudos' and marking my post as 'Accepted Solution'.

Regards,
Shiva_jr

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".