Proliant ML110 G7 memory upgrade

[gian125]

Hello All,

my ML110 G7 doesn't accept this HP part number: 500205-071, which is an 8GB memory chip.

Apparently the specs match the server requirements, so what's wrong with it?

Thanks for you time,

-GianLuca

[support_s]

System recommended content:

1. HP ProLiant ML110 Generation 7 (G7)

2. HPE ProLiant ML110 G7 Server - Configuring Storage

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[Cali]

Hi,

if you look in the QuickSpec of the Server, see:

HP ProLiant ML110 G7 Models
2GB or 4 GB of PC3-10600E DDR3 UDIMM running up to 1333MHz with memory kits installed.
Max: 16GB

So, this Server support only 2/4GB and needs unbuffered Memory (UDIMM), this is 8GB and Registered.
Check here: Document - HP ProLiant G7 Servers - Part Number Memory Matrix | HPE Support

Cali

[gian125]

thanks for your kind reply.

I had seen that, but I also found:

https://www.emware.nl/articles/hp-ml110-g7-upgraded-from-16gb-to-32gb-of-memory.html

[Cali · Accepted solution]

He used Kingston KTH-PL313E/8G.
This are UDIMM (Unregistered), your are registered.
Cali

[SanjeevGoyal]

Hello,

This part number 500205-071 is not supported by this server.

Follow the below documents for more clarifications.

HP ProLiant ML110 G7 Server - Spare Parts
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c02794175

HP ProLiant ML110 G7 Server - Option Parts
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02863180

HPE ProLiant ML110 G7 Server - Overview
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02793565

https://www.hpe.com/psnow/doc/c04284861

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,

[gian125]

thanks, now everything is clear