Proliant ML530 (old) - cannot go to RSBU after CMOS & NVRAM Erased

[Jian_2]

Hi,

I accidently erased the CMOS & NVRAM Using the SmartStart CD. Now I cannot go in to RSBU to set the SCSI Controller as the Primary boot controller. I don't see F9 during the boot-up process.

Is there any other way to go to RSBU?

.. jian

[Oleg Koroz]

create first two diskettes
http://h18007.www1.hp.com/support/files/server/us/download/13227.html

navigate trough GUI select from HDD

[Oleg Koroz]

navigate trough GUI select continue boot from HDD (not from Media) after you will get configuration wizard, save and exit , adds you can verify from message boot controller

[Prashant (I am Back)]

it called as SCU (System Configuration Utility)

http://h18023.www1.hp.com/support/files/server/us/download/13227.html

This is what you need to do on your server.

Prashant S.

[Jian_2]

I used the old SmartStart 5.4.