Raid 1+ 0 problem with smart Array 5300, windows 2000 SP4

[Claudio Mella]

I have done probes to broke and rebuild a 1 + 0 raid.
I have not had problem to broke a raid but I have not able to rebuild raid.
On ACU I have not able to find correct option
I do not know how I can configure new disk on raid.

[Ivajlo Yanakiev]

Generaly : )
If you have raid you can savely remove one disk and replace with other one.
You no need to do noting. Just remove disk and replace with new or same disk.
Hard RAID CTL will rebuild automaticly.

What you mean with this :
" have not had problem to broke a raid"
unplug one disk ?

[Claudio Mella]

Yes when i unplug one disk i did not have problem but I have replaced one disk and raid seem like picture.

[Ivajlo Yanakiev]

did RAID star rebuild after you insert disk ?

[Claudio Mella]

No It did Not

[Chris Turnbull]

Claudio,

Try rebooting your server with only the 'good' disk in - you should then get some SCSI/RAID BIOS options to help you.

[Ivajlo Yanakiev]

give me pic
physical and logical view from ACU
and give me pic from error messages
/STOP sign/.

It must rebuild generaly speaking

[Ivajlo Yanakiev]

did you plug disk on same slot ?

[Claudio Mella]

I am sending a picture with acu view.
Yes a plug the disk on the same slot

[Ivajlo Yanakiev]

pls give me physical view I want to see disk
and also status msg.

[Claudio Mella]

I am sendig your request

[Ivajlo Yanakiev]

Yess I see

Look at that

The array A need disk for rebuild with this
setting
SCSI drive port 2 SCSI ID 0

but you have drive on
SCSI drive port 1 SCSI ID 0


There is problem :)))
PORT :)

[Claudio Mella]

mmmm..
Well I will test solution as well

Thanks a lot.