raid 1

[Dramel87]

Bonjour,

j'ai deux disque dur hot plug en raid 1 (slot 0 et 1)....le premier est défectueux (voyant orange) et je dois le remplacer :

-faut-il que le second disque soit mis sur le slot 0 et le nouveaux sur le slot 1 (système arrêté, bien évidemment) avant de l'allumer ?

-dois-je juste mettre le nouveau dans le slot 0, à chaud (système en cours de fonctionnement) ?

merci de votre réponse

Google Translated: 

raid 1
Hello,

I have two hot plug hard drives in raid 1 (slot 0 and 1)....the first one is defective (orange light) and I have to replace it:

-should the second drive be put on slot 0 and the new one on slot 1 (system stopped, of course) before turning it on?

-should I just put the new one in slot 0, hot (system running)?

thank you for your answer

[TVVJ · Accepted solution]

Hello,

Before performing any activity, please backup data. First replace the defective drive and allow the RAID array to rebuild. As the drives are hot plug, they may be replaced while they are functioning.

Regards,

[Cali]

You don't tell us about your server and drive model.

Be sure, that the Orange Light is not the "Do not Remove" LED.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00114989en_us&page=GUID-CEAEB4A7-D62F-4219-973A-5C3DF90A515A.html&docLocale=en_US#ariaid-title1

Cali