Raid array dissapearss

[lasi101]

I changed my storage controller from Smart Array HP and AHCI in order to boot from my hirens, after using hirens i could no longer boot the windows server 2019, than i changed it back to smart array with UEFI boot mode, but i could still not boot, and i can not see my arrays any longer.

[shiva_jr]

Hi lasi101,
I guess, the logical drive is not set as bootable. Please check once.
Steps:
1. Change the array to required mode (AHCI/UEFI)
2. Validate the Array and logical volume are visible.
3. Go to Go to Array -> Actions -> 'Set Bootable logical drive/volume', validate the the logical drive is set as bootable.
4. Reboot the server and boot the server with OS.

Regards,
Shiva_JR
Please mark as 'Accepted solution' if my post worked

[shiva_jr]

Hello lasi101,
Let us know if you were able to resolve the issue.
If you have no further queries and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Regards,
Shiva_jr