Recovery raid data with. Dl160 G9 - b140i

[Larvin]

I have an HP DL160 Gen 9 server with 4 disk drives, 2 HDD with RAID 1 and 2 SSD with RAID 1.
This server is restarting repeatedly when the esxi System boots.
If I install these 4 disks on an identical server with the same controller model and same server model, will I be able to restore this raid without losing the data?

[shiva_jr]

Hi Larvin, 
Yes, you can move the disks to the new server and get the RAID levels work well. I believe the array information will be stored on the disks.
Note:
a) Take the backup of the data if possible
b) Ensure the new server should be ready with updated firmware. You can download and update the firmware by SPP
b) Make a note about current RAID configuration and disks so that same way the disks should work with same RAID level
Regards,
Shiva_JR
Please mark as Solution Accepted, if this post answers your query.

[Sunitha_Mod]

Hello @Larvin,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.