Replacement Hard Drive DL380 GEN10

[YamidP]

Hello everyone

I have a DL380 GEN 10 with 6 hard drives, it has the following configuration, the first two bays are RAID 0 and the last four are RAID 1+0

C = 278GB RAID 0 D = 2.2TB RAID 1+0

however, the last hard drive in the last bay was damaged. I am going to perform disk replacement, however this hard drive has different used space than primary hard drive.

What is the procedure to add a hard drive with different used space to the main or mirror hard drive?

[support_s]

System recommended content:

1. HPE ProLiant DL380 Gen10 Server Maintenance and Service Guide | Removing and replacing drives

2. HPE ProLiant DL380 Gen10 Server User Guide | Removing the hard drive blank

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TVVJ · Accepted solution]

Hello,

When a working drive is inserted as replacement, the HPE Smart Array controller in the server considers the entire capacity of the disk being installed.

Ensure that you do not swap a SATA for a SAS or vice-versa.

As far as possible ensure that the drive inserted has the same capacity of the other hard drives in the array and not less, for this creates problem.

Regards,

[Sunitha_Mod]

Hello @YamidP,

We do see you have marked the reply as solved. We are glad to know the problem has been resolved.