retrieve Smart Array P410i status messages / codes with hpssacli.exe

[SvenGS]

dear community

I use the following command to monitor my physical hard drives:

hpssacli.exe controller slot=0 physicaldrive all show

And the following command to monitor the controller status overall

hpssacli.exe controller all show status

and this command for the configuration

hpssacli.exe controller all show config detail

this works fine.

In the "Smart Storage Administrator" application I noticed all the warnings do have a code, e.g. 263 stands for the failed battery capacitor. After the replacing of a failed drive, I noticed a new warning code 284 :  Firmware update is recommended.

What I'm looking for is a hpssacli.exe command the retrieve all status messages (criticals, warnings) displayed in the "HP Smart Storage Administrator" application. Because there are for sure other errors, warnings which haven't yet occured - as the one with the firmware.

background: currently hpssacli.exe is executed periodically and its output is written to a file which is parsed by a proprietary monitoring solution.

Or are there other options to monitor the occurance of error/warning message in the "Smart Storage Administrator" application?

Server: HP DL380 G7 with Windows Server 2012 R2 (yes its old, but it runs since day 1 somoothly!)

Thank you

[Bunsol]

The G7 served is not listed in the compatible Operating system with Windows 2012 R2:-

https://techlibrary.hpe.com/us/en/enterprise/servers/supportmatrix/windows_archived.aspx

You can use smart start CD in offline mode and use the ACU to check the configuration, error messages and also reun diagnostics.