HPE Community
ProLiant Servers (ML,DL,SL)
1845768 Members
4792 Online
110250 Solutions
New Discussion

RIS Server Boot

 
Ernest Correale
New Member

‎10-19-2005 02:21 AM

‎10-19-2005 02:21 AM

RIS Server Boot

I am trying to configure a DL145 G2 for network boot using a MS RIS Server. I am using the Broadcom drivers which should be the correct NIC drivers for the server but the system fails to load the drivers after jumping from PXE to the MS environment. I have the same server already installed through the CDROM and I verified that I am using the correct drivers.I am trying to configure a DL145 G2 for network boot using a Microsoft RIS Server. I am using the Broadcom drivers which should be the correct NIC drivers for the server but the system fails to load the drivers after jumping from PXE to the MS environment. I have the same server already installed through the CDROM and I verified that I am using the correct drivers. Has anyone had success loading an OS using RIS on a DL145 G2?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.