SAS LEDs

[Parisa_1]

Hello, We have 2 DL series servers. Each of them has 2 controllers. One integrated, and one adittional controller. P410 & P410i. Hard drives which are attached to the integrated cotroller, works correctly. but on both servers, LEDs of SAS drives which are attached to the external controller, behave strangely. I mean, they are flashhing in 1 Hz frequency, which means they are rebuilding , expanding, or migrating. But they are not in this situation. array controller does not show this. Even if this is true, why they are always in this state?

[Michael A. McKenney]

Does the HP tools report the drives are healthy and arrays are healthy?

You might need to upgrade the firmware on the controller, server board, and drives.

[Torsten.]

>> they are flashhing in 1 Hz frequency, which means they are rebuilding ,


Sure?
I need to look up this (SAS disks behave differently and it depends on the controller), but IIRC this frequency means the disks are idle...

[Parisa_1]

Thanks for your soon reply,

Actually every things looks healthy except system management home page logs, with this error:
array is not configured!!!
but arrays are configured and ACU shows they are working fine. I have working data on them. and disks are not idle. The firmware version of both controllers are the same , but the integrated controller behaves normally.

[Torsten.]

It would be helpful if you could tell the server model, e.g. DL380G7 or something.

[Parisa_1]

DL370 G6 and DL380 G7