Server DL180G9 PSU Configuration

[kokpit]

HI

please help me with making this server with Redundant Power Supply:

833988-425 HPE ProLiant DL180 Gen9 Intel Xeon E5-2620v4 8-Core (2.10GHz 20MB) 16GB (1 x 16GB) PC4-2400T-R 2400MHz RDIMM 2 x 300GB (10k rpm) Hot Plug 2.5in Small Form Factor Smart Carrier SAS Smart Array P440/2GB FBWC No Optical 900W 3yr Parts 1yr Onsite Warranty

Form Factor

Rack Mount (2U)

Processor

max: 2Intel Xeon E5-2620v4 8-Core (2.10GHz 20MB L3 Cache) Kit

Memory

slots: 8 (16)16GB (1 x 16GB) DDR4 2400MHz RDIMM

Graphics

Integrated Matrox G200eH2 with 16MB Video RAM

Network

HP Embedded Dual Port 361i Adapter

Disk Storage

max: 8 (16)2 x 300GB (10k rpm) Hot Plug 2.5in SC SAS

Disk Storage Controller

Smart Array P440/2GB FBWC 12Gb 1-port Internal SAS Controller (Incl. SmartCell)

Disk Storage Backplane

Hot Plug 2.5in Small Form Factor Smart Carrier Hard Disk

Optical Storage

None

Interface Card Slots

MODb 8x Full Height : 1 ,  MODe 8x Full Height : 1 ,  MODm 8x Full Height : <stro< span="">

Power Supply

max: 21 x HPE 900W AC 240VDC Power Input Module

Management

iLO 4 (Upgradeable Non-Dedicated Port) (No Licence) / No OneView or Insight Control

Warranty

3 Year Parts / 1 Year Labour / 1 Year Onsite Warranty

Also Included

HP 2U Cable Management Arm (CMA) for Easy Install Rail Kit, HP 2U SFF Easy Install Rail Kit (CMA not included)

Other Features

HP 96W Megacell Battery with 145mm Cable

is it enough just  775595-B21    HPE 900W AC 240VDC Power Input Module
OR it needs another module and Back Plain.

Thank you

[parnassus]

Hi!

If your HPE ProLiant DL180 Gen9 Server was factory equipped with a single HPE 900W AC 240 V DC Power Input Module (775595-B21) yet...then to deploy a Redundant Power Supply configuration...you should equip it with another HPE 900W AC 240 V DC Power Input Module (775595-B21), which acts as the second one PIM, plus the related HPE 900W RPS Power Backplane (745813-B21), to do so - hope not be wrong here - there is a specific SKU 820792-B21 which is a Kit: the HPE 900W AC 240 V Dc Redundant Power Supply Kit (820792-B21) includes yet exactly two Power Suppy Input Modules and one Backplane Kit...so, if you chose to purchase that Kit, you will probably end up, at least as I understand it, with a spare Power Input Module (the one already factory installed on your Server: the HPE 900W AC 240 V DC Power Input Module).

Read here:

and here:

References:

• HPE ProLiant DL180 Gen9 QuickSpecs.
• HPE Servers Options family guide.
• HPE Entry-Level Power Supplies QuickSpecs.

[kokpit]

As from the GO config the server comes with: 

744689-B21  900W Hot Plug, no IPD, DLxx/DL1xx, Gen9

and from documentation i think this Power Backplane (745813-B21) 

so If i add 

HPE 900W AC 240VDC Power Input Module 775595-B21 do i need aditional Power back plain  compatible with this module ??

HPE 900W AC 240VDC RPS Power Backplane  814835-B21

" HPE Entry-Level Power Supplies" - info text

HPE ProLiant Gen9 Essential Server Power Supplies - Redundant

NOTE: Supports Gold-level efficiency (92%) with a standard C14 inlet connector. No support for HPE Power Discovery Services. Only compatible with select HPE ProLiant Gen9 Essential servers.

NOTE: Each Redundant Power Supply Backplane can support up to two (2) power input modules.  Non-redundant configurations with a single power input module installed can provide up to 900W (200 - 240VAC) and up to 550W (100 - 127VAC) of power.  Redundant configurations with two power input modules installed can provide up to 800W (200 - 240VAC) and up to 550W (100 - 127VAC) of power.

NOTE: 744689-B21 will not work with 814835-B21.

HPE 900W AC 240VDC Power Input Module 775595-B21

HPE 900W AC 240VDC RPS Power Backplane 814835-B21

HPE 900W AC 240VDC Redundant Power Supply Kit 820792-B21

NOTE: Each Redundant Power Supply Backplane can support up to two (2) power input modules.

NOTE: 240VDC function will not work when 775595-B21is installed in 745813-B21. Only AC input will be enable.

NOTE: Redundant AC Power Input Modules do not share power. Redundant AC Power Input Module #1 is the primary AC Power Input Module. Redundant AC Power Input Module #2 is the backup AC Power Input Module.

NOTE: HPE 900W Gold (Redundant) AC 240VDC Power Input Module (775595-B21) must be used with Power Backplane (814835-B21).

[kokpit]

i think i found the info that i was looking for

NOTE: 240VDC function will not work when 775595-B21is installed in 745813-B21. Only AC input will be enable.

NOTE: Redundant AC Power Input Modules do not share power. Redundant AC Power Input Module #1 is the primary AC Power Input Module. Redundant AC Power Input Module #2 is the backup AC Power Input Module.

 HPE Entry-Level Power Supplies - document.

It will be OK just to put  775595-B21 but they will act as active and passive PSUs ..

[parnassus]

Probably: at the end, two 775595-B21 (so one added to the one you already have installed) plus one 814835-B21 instead of purchasing the whole Kit 820792-B21...documentation definitely isn't clear about this combination.

[Saravanan5512]

Hi,

The HPE 900W AC 240VDC Power Input Module with Power Backplane can be configured to support power redundancy.

HPE ProLiant Gen9 Essential Server Power Supplies - Redundant

HPE 900W Standard AC 240VDC Power Input Module FIO Kit

828734-B21

NOTE: This is a Factory Installed Option (FIO) only.

NOTE: RPS Backplane is mandatory to be chosen with this power input module.

HPE 900W Standard AC 240VDC RPS Power Backplane FIO Kit

828735-B21

NOTE: This is a Factory Installed Option (FIO) only.

NOTE: This RPS backplane is mandatory to be chosen along with 900W RPS

input module.

HPE 900W Standard AC 240VDC Power Input Module

775595-B21

Thanks & regards

Saravanan.

Personal Info Erased