Setting up an HPE Proliant ml30 gen10 plus as web server

[RogueAgent]

Our company currently has a few websites being hosted via a third party, but the service is getting expensive because of hard drive space requirements (lots of training videos).

I am tasked with setting up a web server to host the websites. The HPE Proliant ml30 gen10 is reasonably priced and appears to have all the necessary functionality. My expected configuration:

• HPE Proliant ml30 gen10 plus E-2314 2.8GHz 4-core
• 8 SFF hot-swap bays
• 32 or 48 GB RAM
• 4×2 TB SSD (Western Digital Red) configured RAID 5
• Ubuntu, Plesk

This connected to a 1 GBs fiber internet connection.  

I have used Ubuntu and Plesk, but never installed and configured them, or configured a web server. Are there any guides out there?

Am I way out of my league? Suggestions?

Thx

[support_s]

System recommended content:

1. Extended Ambient Temperature Guidelines for Gen10 Plus HPE ProLiant and HPE Apollo servers and HPE Synergy | HPE ProLiant ML30 Gen10 Plus Server

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978 · Accepted solution]

Hi,

There are documents out there about installing and configuring the web server.

Thank You!
I work with HPE but opinions expressed here are mine.

[RogueAgent]

@Suman_1978 I also found this on configuring the server:

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001120en_us&page=GUID-A168C42E-5656-4A15-BDED-42B0123BB40D.html

[Mr_Techie]

@RogueAgent 

Did you found the solution?