Smart Array 420i Controller Disk Swap

[BNyTee]

I had two 300GB Drives Mirrored.  One Failed.

I replaced the failed 300GB, with a spare 1.2 TB,  until I could get a replacement 300GB.

Once I got the 300GB Replacement I swapped out the 1.2TB.

Everything went fine.

Now I want to add the 1.2TB Drive to another array on the same controller. 

Will there be any issues when I insert the drive into the controller, and then when I try adding it to a different array

[PGTRI · Accepted solution]

hi,

There will be no problem to add the disc in another array. 

thanks,

[BNyTee]

Thank you.  It works.