SMART Array Error on Boot

[Ayman Altounji]

Can someone tell me how to fix this error that the POST is reporting every time I boot?

Proliant Storage - Enclosure Problem Detected
Wide SCSI Trasfer Failed

I can't seem to figure out what this error means. I'm running all the latest system and raid controller Firmware. The SMART Array is model 3200.

-ryan.

[Ayman Altounji]

If you have a Proliant Storage enclosure in use, disconnect the cable to see if the post error goes away. If the controller is using internal drives, try swapping the cables out - check that nothing is touching the card, and that it's seated. There is a signal line on the array inteface used to 'flag' errors on an external storage system. Make sure the daughter card is FIRMLY seated.