smartarray 5302 post 1777 code

[Kevin Powell_2]

Hi, I've got a Compaq ProLiant ML370 G3 with two SCSI hard drive storage enclosures. The standard 6-drive enclosure is connected to the smartarray 5302 controller's port 1, and I have an additional 2-drive enclosure located in the 5.25" slots above, which is connected to the 5302's port 2. Upon booting, I receive a POST error message as follows:

1777-Slot 2 Drive Array-
ProLiant Storage Enclosure Problem Detected
SCSI Port 2-Cooling Fan Malfunction Detected

Aside from that, the server works fine, but I'd like to correct this POST error. FYI, the 5302's firmware is running v2.32, and the system ROM version is P28 (08/16/2002).

Thanks,
Kevin Powell

[Leon Rosier]

Jumper J20 on the drivecage needs to be in the closed position.

Leon

[yasin]

hi,
i have same problem and my server gives same post error. i don't know how to change J20 closed position.could you explain it.i couldn't find drive cage(backplane board)user guide or manual guide on the internet and hp web site.
thanx


Nisay