SN1100Q Status Lights

[genghis]

Will the status lights show "UP/ACT" as long as there is a fiber connection to a live port, or does that also require the LUN actually need to be configured and active in the OS? For example, a Gen10/SN1100Q server that is just sitting with a live fiber connection (assume 16Gb) but no OS, what should the status lights show?

[YTurbin]

No Light by default. You have to enable adapter driver in UEFI.

8. Select Boot Settings and then press Enter.
9. Select Adapter Driver and then press Enter. Set it to Enabled and then press Enter

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c01861120