Stop 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL in HpCISSs2.sys

[Torsten Streng]

Hi !

I am doing a scripted (Windows Server 2003 Standard) install on a DL380 G5.
When Windows loads, you see the 39 minute remaining screen. At this stage it blue screens and the error is:

"Stop 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL in HpCISSs2.sys"

I used the package cp006299.exe.

This is my txtsetup.oem:

[Disks]
d1 = "Windows 2003 Driver Set v1.00", w23dsk1, \


[Defaults]
SCSI = s2


[SCSI]
s2 = "Server 2003 Driver for Smart Array SAS/SATA Controllers"
B060 = "Smart Array 5300 Controller"
B178 = "Smart Array 5i, 532, 5312 Controllers"
0046 = "Smart Array 6i, 641, 642, 6400, 6400EM Controllers"



[Files.scsi.B060]
driver = d1,cpqcissm.sys,cpqcissm
;dll = d1,cpqcissm.dll
inf = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat


[Files.scsi.B178]
driver = d1,cpqcissm.sys,cpqcissm
;dll = d1,cpqcissm.dll
inf = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat


[Files.scsi.0046]
driver = d1,cpqcissm.sys,cpqcissm
;dll = d1,cpqcissm.dll
inf = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat


[Files.scsi.s2]
driver = d1,HpCISSs2.sys, HpCISSs2
inf = d1,HpCISSx2.inf
catalog = d1,HpCISSs2.cat


[Config.cpqcissm]
value = "",tag,REG_DWORD,103
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,NumberOfRequests,REG_DWORD,80


[Config.HpCISSs2]
value = "",tag,REG_DWORD,103
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,DriverParameter,REG_SZ,"CSMI=None;"


[HardwareIds.scsi.B060]
id = "PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11","cpqcissm"
; W2K Default.
id = "PCI\VEN_0E11&DEV_B060","cpqcissm"


[HardwareIds.scsi.B178]
id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11","cpqcissm"
; W2K Default.
id = "PCI\VEN_0E11&DEV_B178","cpqcissm"


[HardwareIds.scsi.0046]
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_40910E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409A0E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409B0E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409C0E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409D0E11","cpqcissm"
; W2K Default.
id = "PCI\VEN_0E11&DEV_0046","cpqcissm"


[HardwareIds.scsi.s2]
id = "PCI\VEN_103C&DEV_3220&SUBSYS_3225103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3234103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3235103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3212103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3211103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3232&SUBSYS_40A00E11", "HpCISSs2"

And this is my unattend.txt:

[MassStorageDrivers]
"IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"
"Smart Array 6i, 641, 642, 6400, 6400EM Controllers" = "OEM"
"Smart Array 5i, 532, 5312 Controllers" = "OEM"
"Server 2003 Driver for Smart Array SAS/SATA Controllers" = "OEM"

[OEMBootFiles]
cpqcissm.sys
cpqcissm.inf
cpqcissm.cat
txtsetup.oem
hpcisss2.sys
hpcissx2.inf
hpcisss2.cat

Any idea?

[Bryan Eley]

Hi Torsten,

This problem might be related to this advisory, which affects the DL 380 G5 series:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00715130

Hope this helps!

Bryan

[Torsten Streng]

Hi Bryan,

I've already seen this advisory but this is not my error message. I got the following:

STOP: 0x000000D1 (0x00000014,0x00000006,0x00000000,0xF74D9F39)

HpCISSs2.sys - Adress F74D9F39 base at F74D7000, DateStamp 44ac26e9

[Bryan Eley]

If you've seen that article, then you've probably also seen the one recommending using a Microsoft Windows Server 2003 SP1 Slipstream CD (Document ID: c00715130), though I think that may pertain specifically to the P600 controller . Certain system rom versions earlier than August 2005 caused a similar bluescreen, except I think the stop error was a 0x0A or some such.

Bryan

[Torsten Streng]

Yes I've seen that article. But there's a P400 controller in my server and the System ROM is from 09/18/2006.

HELP me pleeeeease Mr. HP !

[Torsten Streng]

New year, new try....!?

[Attila Szabó]

Dear Torsten,

Did you tried to install the server with latest Smartstart (7.60, iso image here --> http://h18023.www1.hp.com/support/files/server/us/download/25190.html), and with Windows 2003 SP1 install CD?
(just to be sure, do you really need the scripted install?)

Regards,
Attila

[Terry Hutchings]

Have you been able to rule out the scripted install as part of the problem? Also have you tried the latest version of this driver? I would try a manual install and see if that works to determine if the scripted install is the source of the problem. We need to know where to start working this problem logically to determine the cause.

[Torsten Streng]

Hello!

I'm able to install the server manually. I've made this with Smart Start 7.60 and Windows 2003 Standard.

For the unattend installation I use the latest drivers.

It's really unbelievable. I've never had this problems with other DL models.

[Torsten Streng]

It's fixed now. I tried an unattend installation without SP1 for W2K3. I've extracted the Storport driver from the SmartStart CD.

[Torsten Streng]

Used Storport driver from the SmartStart CD.

[Dominik Meier]

Hi Torsten

I have the same problem. Which cp00xxxx.exe have you yoused for your solution?

If you want you can write a email in german to my business account: meierd[at]bell.ch

Maybe we can exchange some information about scriptet W2k3 installations on HP Proliant Servers.

Dominik