ProLiant Servers (ML,DL,SL)
1823075 Members
3142 Online
109645 Solutions
New Discussion

System is too hot or has lost cooling..

 
Mohammed Sameed
New Member

System is too hot or has lost cooling..

Please Help,

our Server HP : ML350T04 was given an pop message as follow while i was coonected to that server remotly.

when check the server there is an red lamp in front which second from left out of five.

first popup is as follow


Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 05/11/2006
Time: 12:11:07 PM
User: N/A
Computer: GOLD-AD-SRV
Description:
Application popup: System Shutdown : The system is shutting down. Please save all work in progress and log off. Any unsaved changes will be lost. This shutdown was initiated by NT AUTHORITY\SYSTEM. Shutdown will begin in 59 seconds. Shutdown message: HP ProLiant System Shutdown Service: System is too hot or has lost cooling..

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
------------------------

and not shut down, within a two three socond again a nother event as follow.

Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 05/11/2006
Time: 12:11:08 PM
User: N/A
Computer: GOLD-AD-SRV
Description:
Application popup: System Shutdown Cancelled : The system shutdown has been cancelled by NT AUTHORITY\SYSTEM

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Please what to do rectify this, while this our domain server.

More over server cabinet in a almost a cool room (temprature not more then 25C.


Help Please........

Sameed
1 REPLY 1
Sanjay  Nayak
Advisor

Re: System is too hot or has lost cooling..

Hi,
If you could have someone onsite ,then please open the side panel of the server to see if there is any amber/red LED on any of the components inside .If the server stays on for a while then you could also try upgrading the server firmware

http://h18007.www1.hp.com/support/files/server/us/index.html

Please use the link above to do that