System Power Fault Detected on ProLiant DL360p Gen8

[kayalan2]

Hi,

I have  ProLiant DL360p Gen8 giving on the ILO Log the following message below:

System Power Fault Detected (XR: 10 00 MID: FF 0D FC 06 FF FF 28 28 0C 0C 40 3F 20 00 03 01 81 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00)

I was reading other threads with similar issues, but still not getting any solutions ....

So far I follow on instyruction to reset DIP switch #6 on the server, but doesn-t work ...

The main behaviour is:

1-I boot the server 

2-Try to initiate system, without any prompt on screen or on the SID panel. 

3-Suddenly shuts down and starts blinqing red the power led ....

4-And stops ...

Any assitance to solve this, I´ll appreciate....

P.S.: This server was working normally. I have installed software normally on the past ...

Kay