HPE Community
ProLiant Servers (ML,DL,SL)
1827286 Members
1785 Online
109717 Solutions
New Discussion

Terminal Server Load on DL 380

 
Seth Woodring
New Member

‎04-28-2003 08:50 AM

‎04-28-2003 08:50 AM

Terminal Server Load on DL 380

Hi,

I am trying to load a DL380 Server with WINNT 4.0 Terminal Server. The problem is that in order to configure the RAID partition, I must run Compaq Smart Start Ver 5.40. During this load, you are given the option to install your OS. WINNT 4.0 Terminal Server is not one of these options. Could anyone please offer some insight as to how to get around this.

Thanks
0 Kudos
Reply
1 REPLY 1
Terry Hutchings
Honored Contributor

‎04-28-2003 09:04 AM

‎04-28-2003 09:04 AM

Re: Terminal Server Load on DL 380

Terminal Server isn't a supported option for an assisted install. All this should require is to boot off the NT Terminal Server CD, specify the driver for the controller by pressiing F6 and specify the nic driver. The support pack can be installed once the OS is up and running.
The truth is out there, but I forgot the URL..
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.