There is a information on the screen when the server opening with SPP 2025.03

[ugrysr]

Hi Everyone.

I downloaded SPP 2025.03 a few day ago.

At first i had a SPP 2025.01 then i was set up plenty of server with 2025.01.

That is my issue when i set up 2025.03 and when open the server i push F10 (intellegient Provisioning) on the screen has been writing this information ( WARNING: RISK OF DATA LOSS). 

Why am i see this information. ? How can i remove the information that i see when i push the button F10 ?

[Moderator edit: Erased the confidential info.]

[SydUmar_1]

Hello @ugrysr 
This screen usually comes up when either the Secure erase or One-button secure erase options are selected in HPE Intelligent Provisioning.  Could you disconnect or unmount the 2025.01 SPP, restart the server and try getting into Intelligent Provisioning (F10) and check if the same warning appears? 

[Cali · Accepted solution]

Found this:

Version: 2.46_02-21-2025 (27 Feb 2025)

Enhancements

Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

Cali

[ugrysr]

i think, i cant handle it in future installations.

as fa as i understand Hp has wanted to handle for information their customers about the "RISK ONFORMATION"

[Marco12]

HPE forgot to write that you just press ENTER to continue! I lost almost 20 minutes figuring it out....

[Fernando43]

Boa tarde tudo bem, eu estava com o mesmo problema que o seu a partir do momento que atualizei a Bios para a versão 3.62.
efetuei varios procedimentos, etá começar a fazer o downgrad da Bios.
A Bios que deixei foi a 3.40, pois as Bios 3.62, 3.60, 3.50 e 3.42, estão dando o mesmo erro, essa foi a soluçao que encontrei, deixar na versão 3.40.

**Google Translate**

Good afternoon, everything alright? I was having the same problem as you after updating the BIOS to version 3.62.
I performed several procedures, and I started downgrading the BIOS.
The BIOS I left was 3.40, because BIOS versions 3.62, 3.60, 3.50, and 3.42 are giving the same error. This was the solution I found: leaving it on version 3.40.

[Thaufique_Mod]

Hello @Fernando43,

Hello, Thank you for writing to us! You might want to consider creating a new topic by utilizing the "New Discussion" button, as this will not only enhance visibility compared to the old topic but also boost your chances of receiving responses from experts.