Update via SPP/SMU without ILO interface

[pbezerra]

I have an "HPE Proliant Microserver Gen10" and would like to update it. I saw the indication of using SPP, which I have already tried both by mounting the ISO in Windows 2019 and also via USB flash drive. The problem in both modes is that when it comes to detecting the local host, an error is displayed stating that it was not possible to connect to the ILO interface, but I do not have this interface on this equipment. How do I update the equipment without the ILO interface?

[support_s]

System recommended content:

1. HPE iLO 5 User Guide | iLO Service Port

2. HPE iLO 5 Security Technology Brief | iLO Service Port

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TVVJ]

Hello,

You may download the drivers and install them for each component from the "HPE ProLiant MicroServer Gen10" driver and firmware download page.

Regards,

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".