upgrade memory in DL320s

[egen]

I tried to set ones more memory module in the server DL320s 9Tb. But after installing the server does not boot and flashed a red LED on the front panel.

Memory like the same as the original - Kingston 1Gb PC2-5300 CL5  KVR667D2N5/1G

[Johan Guldmyr]

According to the quickspecs it looks like you're supposed to be able to put the DIMMs in any of the slots.

Is the new DIMM exactly the same? I would assume that the original memory is an HP memory and not a Kingston (unsupported?)..

The text in your picture is unreadable.

You could try: another DIMM slots or swap the DIMMs around.

Does it for example work if you take out one of the existing ones and put this Kingston there?

Firmware / Clear NVRAM.

Sometimes there is some dirt in the DIMM socket which can cause problems, try to blow it out with some kind of good-for-electronics canned air.

http://h18000.www1.hp.com/products/quickspecs/12571_na/12571_na.HTML#Memory

[egen]

I tried to install in different slots, same result. I'll try the memory of another manufacturer.

Thank for reply.