ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

vcpu0 disabled perfctr wrmsr on DL 360 HPE

 
Highlighted
Occasional Advisor

vcpu0 disabled perfctr wrmsr on DL 360 HPE

Dears, 

getting an issue while performing a reboot a host OS "redhat 7.'4"  with virtualization enabled,  running on  of an HPE DL 360 server, 

i have installed a VM with cpu pining to install a VM on.

Have anyone faced the same or have an idea? 

Bios setting: 

Hyperthreading Desabled.

RAID1, and leagacy boot  mode 

Thanks in advance for your support.

3 REPLIES 3
Highlighted
HPE Pro

Re: vcpu0 disabled perfctr wrmsr on DL 360 HPE

Hi @HB3 , 

This warning message is reporting that the operating system cannot access the HW PMU counters and should not be of any concern. The messages do not affect the functionality or performance of the operating system or the server and can be safely ignored.

Please let us know if you are facing any performance issue on the server due to these warnings. 

Also, find the relevant article stating the same below:

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03265132

 

Regards,
HPE Employee

Accept or Kudo

Highlighted
Occasional Advisor

Re: vcpu0 disabled perfctr wrmsr on DL 360 HPE

 Hi Rhythm596

no performance issues on the server, just when using Virsh to start VM these error occurs.

thanks for your support.

Highlighted
HPE Pro

Re: vcpu0 disabled perfctr wrmsr on DL 360 HPE

HI @HB3 , 

Since there is no symptom this can be safely ignored as per the advisory below:

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03265132

 

Regards,
HPE Employee

Accept or Kudo