Warning 219 in EvnetLog after Reboot

[Klausi]

After each Reboot of HP ProLiant DL 360 G6 with Windows Server 2008 R2 SP1 I receive a Warning in EventLog:

Source:        Microsoft-Windows-Kernel-PnP

Event ID:      219 - Task Category: (212) - Level:         Warning

Description:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&1&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_KVM&PROD_VMDISK&REV_0.01#7&B49E0C3&0&103430099AC&0#.

The Device Manager shows a warning in "Other devices" under "Base System Device" with no driver found

I already have installed the current "HP ProLiant iLO 2 Management Controller Driver for Windows Server 2008 x64 Editions" in version 1.14 - but that did only solve 2 out of 3 errors in Device Manager - even after reboot.

The Hardware IDs are

PCI\VEN_0E11&DEV_B204&SUBSYS_3305103C&REV_03

PCI\VEN_0E11&DEV_B204&SUBSYS_3305103C

PCI\VEN_0E11&DEV_B204&CC_088000

PCI\VEN_0E11&DEV_B204&CC_0880

Thanks Klaus

[derick_souza]

Hi Klaus, you tried install PSP ?

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884319&prodNameId=3884320&swEnvOID=4064&swLang=8&mode=2&taskId=135&swItem=MTX-63633e1bebe9431987c1ece85b

[Suman_1978 · Accepted solution]

Hi,

You need to install "HP ProLiant Integrated Lights-Out Management Interface Driver".

Thank You!

I am a HP employee.

[Klausi]

I already updated the iLO Board Driver - but only to the Version 1.14.0.0 which is listed on the Drivers and Downloads page for the specific ProLiant DL360 G6 Server.

Your link pointed to Version 1.16.0.0 of the iLO Board Driver.

Thanks

[Klausi]

Hallo together,

in April I tried your suggestion and installed version 1.16.0.0 of the iLO Board Driver but gave up since the problem had not been solved.

Does anybody have any other solution for above error message. It is still eppearing after each reboot.

Klausi

[Klausi]

Problem SOLVED:

I found on another post that the problem can be solved with putting the Service:

http://www.sevenforums.com/drivers/268212-driver-driver-wudfrd-failed-load-device-error.html

There it is mentioned to put the Service "Windows Driver Foundation - User-mode Driver Framework" 

from Startup type "Manual" to "Automatic"

That solved the problem - even after several reboots.